PL-DR01AT is a single output control, based on IEEE802.3AT standard PoE power intelligent LED driver.
PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
Product Information :
PL-DR01ATProduct Origin :
ChinaColor :
SilverProduct Introduction
The PL-DR01AT driver is suitable for indoor LED lighting. It is connected to the Internet and powered by a Class 5 network cable and a PoE switch that complies with the IEEE802.3AT standard. PL-DR01AT single output can power an LED lamp, the power of a single lamp does not exceed 30W, and the lamp is controlled separately.
PoE-LED driver is a constant current power supply, power supply range 50V-57V. It is recommended to choose a suitable lamp, the power supply efficiency of the driver is better.
PL-DR01AT power supply input and output do not exceed the safe voltage range of 57VDC, easy installation and construction, single power supply and one sensor integrated design, reduce the construction cost. The products are widely used in the field of office and building lighting.
LED Driver technical parameter table | |||
Model | PL-DR01AT | Data Speed | 10/100Mbps |
Input | 44-57Vdc 1.7A | ||
Protocol | IEEE802.3 at Class 4 | ||
Power Pins | 4、5( + )7. 8(-) & 3、6( + ) 1. 2(-) | ||
Output voltage | 5-55Vdc | Output current | 650mA single channel |
Output port | 5.5*2.5mm female plug *1* RS485 *1 | ||
Communication | MQTT | ||
Frequency | 20KHz | ||
Duty cycle | 10%-100% | ||
Dimming | Microwave / brightness / manual | ||
Management | Remote management available | ||
Safety | Overvoltage/overcurrent protection | ||
Color temp | Natural light / cool white / warm white | Brightness range | Monochrome(1000-8191) |
Lamp | Energy-saving lamps / light strips / light bars / ceiling lamps / pendant lamps / floor lamps, etc | ||
Operating temp | -20℃ to 60℃ | Operating humidity | 20% to 80%, non-condensing |
Storage temp | -40,Cto150℃ | Storage humidity | 10% to 90%, non-condensing |
Material | Metal | Color | Silver |
Indicator light | Green: PoE Yellow: Data | ||
Mounting | Wall-mounted | IP Rated | IP40 |
Size | 98.5mmx70.27mmx29.7mm |
1.Connecting a PoE Switch
PoE In input port Connects to a PoE switch that complies with the IEEE802.3BT standard through a Cat5e network cable.
|
2.Connected LED light
LED output ports connect LED lights
that meet voltage and current require ments and support various types of
lights.lamps, etc.
|
Diagram of connecting switch
|
Schematic diagram of connecting LED lights
|
3.Connecting sensor
Intelligent control LED light switch status and brightness.
|
|
Sensor connection diagram
|
|