PL-DR02BT is a two-channel output control, based on IEEEE802.3BT standard PoE power supply intelligent LED driver.
PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
Product Information :
PL-DR02BTProduct Origin :
ChinaColor :
SilverProduct Introduction
The PL-DR02BT driver is suitable for indoor LED lighting, and is connected to the Internet and powered by a Class 5 network cable and a PoE switch that complies with the IEEE802.3BT standard. PL-DR02BT two outputs can power two LED lamps, the power of a single lamp does not exceed60W, the total power generally does not exceed 90W, through the setting or system configuration can be controlled individually each lamp.
PoE-LED driver is a constant current power supply, power supply range of 52V-57V. It is recommended to choose a suitable lamp, the power supply efficiency of the driver is better.
PL-DR02BT power supply input and output are not more than 57VDC safe voltage range, easy installation and construction, two power supply and one sensor integrated design, reduce the construction cost. The products are widely used in the field of office and building lighting.
| LED Driver technical parameter table | |||
| Model | PL-DR02BT | Data Speed | 10/100Mbps |
| Input | 44-57Vdc 1.7A | ||
| Protocol | IEEE802.3 at Class 6 | ||
| Power Pins | 4、5( + )7. 8(-) & 3、6( + ) 1. 2(-) | ||
| Output voltage | 5-55Vdc | Output current | 650mA single channel |
| Output port | 5.5*2.5mm female plug *1* RS485 *1 | ||
| Communication | MQTT | ||
| Frequency | 20KHz | ||
| Duty cycle | 10%-100% | ||
| Dimming | Microwave / brightness / manual | ||
| Management | Remote management available | ||
| Safety | Overvoltage/overcurrent protection | ||
| Color temp | Natural light / cool white / warm white | Brightness range | Monochrome(1000-8191) |
| Lamp | Energy-saving lamps / light strips / light bars / ceiling lamps / pendant lamps / floor lamps, etc | ||
| Operating temp | -20℃ to 60℃ | Operating humidity | 20% to 80%, non-condensing |
| Storage temp | -40,Cto150℃ | Storage humidity | 10% to 90%, non-condensing |
| Material | Metal | Color | Silver |
| Indicator light | Green: PoE Yellow: Data | ||
| Mounting | Wall-mounted | IP Rated | IP40 |
| Size | 98.5mmx70.27mmx29.7mm | ||
|
1.Connecting a PoE Switch
PoE In input port Connects to a PoE switch that complies with the IEEE802.3BT standard through a Cat5e network cable.
|
2.Connected LED light
LED output ports connect LED lights
that meet voltage and current require ments and support various types of
lights.lamps, etc.
|
|
Diagram of connecting switch
|
Schematic diagram of connecting LED lights
|
|
3.Connecting sensor
Intelligent control LED light switch status and brightness.
|
|
|
Sensor connection diagram
|
|
PL-DR02BT is a two-channel output control, based on IEEEE802.3BT standard PoE power supply intelligent LED driver.
PL-DR02AT is a two-channel output control, based on IEEE802.3AT standard PoE power intelligent LED driver.
PL-SER-1M is a PoE LED Server, which can control the driver of the LED light through the PoE Switch, and the LED driver is powered by PoE. It can be connected to the Internet through the cloud server, and PoE LED lights can be controlled from anywhere at any time.
PL-SW01 is a one-way wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW02 is a 2 way wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW03 is a wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW04 is a wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-POS8B-2U-M is a smart LED switch equipped with 8-way PoE output power supply, which improves lighting efficiency and comfort, reduces energy consumption and environmental impact, and improves system stability.
PL-POS16B-2U-M is an intelligent LED Switch with sixteen PoE output power supplies based on the IEEE802.3BT standard.
PL-POS8B-2U is an 8 Port PoE Switch ,8 Port PoE output power supplies based on the IEEE802.3BT standard. Supports WEB management, provides a simple and easy-to-use operation interface, with simple functional configuration, and allows for intuitive viewing of device operation status information.
Easy setup with no software installation or configuration needed,support power detection function, automatically detect devices, will not burned non-stantard PoE device or standard PoE switch.
The PL-IND-1 series is an PoE LED intelligent lighting sensor based on CDM324 and BH1750.
PL-DR04BT is based on the IEEE802.3BT standard. It uses sensors and algorithms to automatically control the brightness and color of the lighting system. It can supply power to 4 LED lights and control each light individually.
PL-DR04BT is based on the IEEE802.3BT standard, which realizes automatic control and individual control of the brightness and color of the lighting system, and the power supply range is 52V-57V.
PL-DR01AT is a single output control, based on IEEE802.3AT standard PoE power intelligent LED driver. PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
PL-DR02BT is a two-channel output control, based on IEEEE802.3BT standard PoE power supply intelligent LED driver. PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
Room 1504, Building 16, No. 7 Keji 10th Road, Songshan Lake Park, Dongguan City, Guangdong Province
IPv6 network supported
