The PL-IND-1 series is an PoE LED intelligent lighting sensor based on CDM324 and BH1750.
Product Information :
PL-IND-1Product Origin :
ChinaColor :
WhiteProduct Introduction
The PoE-LED intelligent lighting sensor uses RS485 interface to connect with the driver, which can not only realize the power supply of the sensor but also realize the human body detection and environmental illumination acquisition. The sensor provides a human presence detection based on CDM324 microwave radar (operating frequency 24.00~24.25GHZ) with a maximum human detection range of 0~6m, improving detection sensitivity and extending service life.
BH1750 is used for illumination detection and correction to improve the accuracy of illumination acquisition. PoE-LED lighting can be more intelligent based on environmental lighting and human body detection.
The PoE-LED intelligent lighting sensor designed and manufactured by using the micro-blog radar's high-precision and multi-light acquisition chip is suitable for small office scenes, which can realize the intelligent adjustment of LED lighting brightness, and save lighting energy consumption and resources.
| LED Sensor technical parameter table | |
| Model | PL-IND-1 |
| Frequency band | 24GHz | SM band, FCC and CE spectrum regulation certified |
| Operating voltage | 44V-57V |
| Operating current | <70mA |
| Modulation mode | FMCW |
| Port | 1RS485 |
| Target application | Human presence sensing |
| Detection range | 0.75-6m, adjustable |
| Detection Angle | ±60° |
| Range resolution | 0.75m |
| Sweep bandwidth | 250MHz meets FCC, CE, No Commission certification standards |
| Illumination range |
0-9000 Lux |
| Environment temp | -40-85℃ |
|
1.Connect the sensor to the driver Connect the sensor cable to the RS485 port of the driver. |
2.Fixed sensor Select the position to fix the sensor. |
|
Connection driver diagram |
Fixed sensor diagram |
PL-DR02BT is a two-channel output control, based on IEEEE802.3BT standard PoE power supply intelligent LED driver.
PL-DR02AT is a two-channel output control, based on IEEE802.3AT standard PoE power intelligent LED driver.
PL-SER-1M is a PoE LED Server, which can control the driver of the LED light through the PoE Switch, and the LED driver is powered by PoE. It can be connected to the Internet through the cloud server, and PoE LED lights can be controlled from anywhere at any time.
PL-SW01 is a one-way wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW02 is a 2 way wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW03 is a wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-SW04 is a wireless switch, which is a remote control intelligent switch based on radio frequency.
PL-POS8B-2U-M is a smart LED switch equipped with 8-way PoE output power supply, which improves lighting efficiency and comfort, reduces energy consumption and environmental impact, and improves system stability.
PL-POS16B-2U-M is an intelligent LED Switch with sixteen PoE output power supplies based on the IEEE802.3BT standard.
PL-POS8B-2U is an 8 Port PoE Switch ,8 Port PoE output power supplies based on the IEEE802.3BT standard. Supports WEB management, provides a simple and easy-to-use operation interface, with simple functional configuration, and allows for intuitive viewing of device operation status information.
Easy setup with no software installation or configuration needed,support power detection function, automatically detect devices, will not burned non-stantard PoE device or standard PoE switch.
The PL-IND-1 series is an PoE LED intelligent lighting sensor based on CDM324 and BH1750.
PL-DR04BT is based on the IEEE802.3BT standard. It uses sensors and algorithms to automatically control the brightness and color of the lighting system. It can supply power to 4 LED lights and control each light individually.
PL-DR04BT is based on the IEEE802.3BT standard, which realizes automatic control and individual control of the brightness and color of the lighting system, and the power supply range is 52V-57V.
PL-DR01AT is a single output control, based on IEEE802.3AT standard PoE power intelligent LED driver. PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
PL-DR02BT is a two-channel output control, based on IEEEE802.3BT standard PoE power supply intelligent LED driver. PoE-LED intelligent lighting is based on PoE network power supply to achieve intelligent lighting system, using sensors and algorithms to automatically control the brightness, color and other parameters of the lighting system, can improve the efficiency and comfort of lighting, while reducing energy consumption and environmental impact, improve the stability of the system.
Room 1504, Building 16, No. 7 Keji 10th Road, Songshan Lake Park, Dongguan City, Guangdong Province
IPv6 network supported
